| Quantity: | |
|---|---|
Desktop Single Nozzle Wax Filling Machine | PLC Control | Heated Pump | 1-1000g
The YD-I is a desktop single-nozzle electric filling machine built for semi-automatic production of candles and wax products. It fills soy wax, beeswax, paraffin wax and similar melting materials from 1 g to 1000 g per shot, with a filling accuracy of ±1 g and a speed of 10-30 pcs per minute. One pump, one nozzle, one compact body of 50x30x35 cm and 15 kg - it sits on any workbench and starts filling the moment the wax is ready.
KEY FEATURES
- Stainless steel filling pump: smooth, wear-resistant and easy to clean, keeping the wax path free of contamination.
- PLC touch screen control: set filling volume, filling speed and interval time directly on screen, then switch between manual and automatic mode for sampling, trial runs or continuous production.
- Heated filling pump: keeps the wax molten inside the pump and nozzle to prevent clogging and cold-start blockage - essential when working with beeswax and high-melting-point paraffin.
- Built-in filter: protects the pump from impurities and extends service life.
- 6 L filling pump capacity: enough for a steady run of small to medium batches without constant refilling.
- Compact and mobile: 15 kg tabletop body, optional trolley cart turns the machine into a complete mobile filling station.
APPLICATIONS
Candle jars and tins, wax melts, votive and pillar candles, sample and small-batch production, and any workshop that fills melted wax or similar materials by weight.
TECHNICAL PARAMETERS
Model: YD-I
CE model: YD-I-I
Power: 500 W
Power supply: 220 V, 50 Hz, single phase
Filling nozzle: single
Filling pump capacity: 6 L
Filling range: 1-1000 g
Filling speed: 10-30 pcs/min
Filling accuracy: 1 g error
Machine size: 50 x 30 x 35 cm
Weight: 15 kg
WHY CHOOSE THIS MODEL
- Real production accuracy of ±1 g, set on screen instead of by mechanical adjustment.
- Heated pump solves the most common wax-filling failure: wax solidifying inside the pump and nozzle.
- Small footprint, 15 kg - fits a small studio as well as a factory bench.
- Manual mode for sampling and single pieces; automatic mode for repeatable batch runs.
ORDERING NOTES
- Confirm the voltage and plug standard for your destination before ordering; the standard unit is 220 V / 50 Hz single phase.
- The trolley cart is optional - tell us if you need the complete mobile set.
- CE model YD-I-I is available on request.
