| Quantity: | |
|---|---|
The 60L Trolley Type Wax Warming and Double Nozzle Filling Machine is designed for candle makers who need to keep molten wax at a set working temperature and fill containers through two nozzles. The trolley-mounted unit combines a warming tray, a removable 60L filling tank and double-nozzle filling for small-batch candle production.
The supplied product information describes a double-layer oil/water jacket used to warm the filling tank. The removable tank supports wax-color or fragrance changes and routine cleaning between batches. A portable mixer is listed as an optional device for mixing wax with ingredients during filling.
This machine is intended as a warming and filling unit. Where solid wax must first be melted, the supplied material recommends using an additional wax heating tank before transfer to this machine.
60L removable filling tank: Supports batch preparation and allows the tank to be removed for cleaning or material changeover.
Double-nozzle filling: Two filling nozzles support container-filling operations.
Double-layer warming design: The supplied material identifies an oil/water jacket warming structure for holding the tank at a set temperature.
Trolley-mounted structure: Helps position the unit within a candle workshop or production area.
Optional portable mixer: Can be selected when wax and added ingredients need mixing during the filling process.
Wax warming and filling station: Suitable for use after wax has been melted in a separate heating tank when required by the process.
Jar candle filling
Scented candle production
Soy wax candle filling
Paraffin wax candle filling
Beeswax candle filling
Small-batch candle manufacturing
Wax filling after melting and blending preparation
Item | Specification shown in supplied material |
|---|---|
Model | YD-60L-II |
CE Model(s) | YD-I-1 |
Filling Tank Capacity | 60L |
Power Supply | 220V, 50Hz, Single Phase |
Power | 4kW |
Filling Nozzle | Double Nozzle |
Filling Pump Size | 6L |
Filling Range | 1–1000g available |
Filling Speed | 10–60 pcs/min |
Filling Accuracy | 1 gram error |
Heating Temperature | 0–120°C |
Machine Size | 107 × 68 × 114 cm |
Weight | 80kg |
Actual filling speed and accuracy can vary with wax formulation, wax temperature, viscosity, fragrance or colorant ratio, container design and target fill weight. The stated filling pump size is reproduced as shown in the supplied material; its time basis is not specified and should be confirmed before using it as an output-rate commitment.
Before quotation, please confirm the wax type, container dimensions, target fill weight, daily production requirement, working temperature, destination voltage and whether an additional wax melting tank or the optional mixer is required.
