| Quantity: | |
|---|---|
Electric Wick Cutting Machine with PLC Touch Screen for Adjustable Length Cutting in Prewaxed Cotton Candle Wick Production
The YD-09 Electric Wick Cutting Machine is designed to cut prewaxed cotton wicks for candle production. Its PLC touch screen allows cutting length, speed and operating parameters to be adjusted to suit the intended wick-processing job.
The machine accommodates different wick-holder sizes, helping workshops prepare more than one wick specification with a suitable setup. It combines electric drive with adjustable cutting settings for the preparation of wicks before subsequent candle-making operations. Sample testing should be used to confirm the required cut length and cutting result.
PLC Touch-Screen Settings: Cutting length, speed and operating parameters can be adjusted through the PLC touch screen, providing a central interface for setting up the cutting job.
Prewaxed Cotton Wick Application: The machine is designed for cutting prewaxed cotton wicks. Match the wick diameter and coating condition to the intended setup before starting production.
Adjustable Cutting Length: The product sheet lists a wick-length range of 20-1000mm, providing a specification range for preparing wicks to the lengths required by different candle designs.
Different Holder Sizes: The machine accommodates various wick-holder sizes rather than being described as a one-size unit. Confirm the supplied holders and any changeover requirements with samples.
Electric Drive Configuration: This model uses electric drive and is listed with a 1.2kW power rating. Confirm the final installation requirements against the equipment's electrical documentation.
Cutting prewaxed cotton wicks for candle production.
Preparing wicks to specified lengths before candle assembly.
Workshop jobs requiring changes in cutting length or speed.
Wick preparation using different compatible holder sizes.
Provide the intended wick sample and target cut length, select the appropriate holder arrangement and establish the cutting settings through the PLC interface. Inspect sample cuts before running the production job. Follow the equipment manual for setup, guarding, operation and maintenance.
Item | Specification |
|---|---|
Product Name | Electric Wick Cutting Machine |
Model | YD-09 |
Power Supply | 220V, 50Hz, Single Phase |
Power | 1.2kW |
Drive Type | Electric |
Wick Size | 0.86-3mm |
Wick Tab Sizes | 12.5 x 2.5mm; 14 x 3mm; 16 x 3mm; 20 x 5mm |
Wick Length | 20-1000mm |
Speed | 12000 m/hour as printed; unit and test conditions to be confirmed |
Machine Size | 50 x 50 x 170cm |
Weight | 150kg |
Control | PLC Touch Screen |
Adjustable Settings | Cutting Length, Speed and Operating Parameters |
Intended Wick Material | Prewaxed Cotton Wick |
The tab-size pairs are reproduced from the product sheet without assigning diameter, height or other dimensional meanings. Verify them against the intended tab drawing. The sheet does not provide a numerical cutting-accuracy tolerance.
Please provide the wick diameter, coating condition, required cut lengths and wick-holder or tab samples. Confirm the included holder/tooling set, adjustment procedure, required output, acceptance tolerance and installation requirements. The printed speed must be verified before it is used as a production commitment.
