| Quantity: | |
|---|---|
Candle Wick Dipping Machine with Wax Melting and Cooling Section for Coated Wick Preparation in Candle Manufacturing Workshops
The YD-08 Candle Wick Dipping Machine combines wax melting and wick dipping for the preparation of wax-coated candle wicks. Its elongated layout provides a travel path for the coated wick to cool and take shape after dipping, supporting the preparation stage before subsequent wick processing or candle assembly.
Different-diameter sizing holes accommodate varying wick thicknesses. By bringing wax preparation, coating and shaping into one equipment layout, the machine offers a dedicated solution for workshops that prepare coated wicks for candle production. The coating setup should be matched to the selected wick and wax before a production run.
Wax Melting and Dipping: The machine combines wax melting with wick dipping, supporting the application of a wax coating during candle wick preparation.
Extended Cooling Path: The elongated machine layout gives the coated wick a travel path to cool after dipping, helping the coating set before further processing.
Wick Shaping Support: The dipping and sizing arrangement is designed to support a rounded coated-wick profile, with the setup matched to the wick and wax being processed.
Different Sizing Holes: Holes with different diameters accommodate varying wick thicknesses, allowing the coating setup to be selected for the intended wick specification.
Electric Operation: The product sheet specifies electric operation and a 220V, 50Hz single-phase power supply for use in a suitably equipped wick-preparation workspace.
Wax coating of wicks for candle production.
Coated-wick preparation in candle manufacturing workshops.
Cooling and shaping after the dipping stage.
Preparation of different wick thicknesses using matched sizing holes.
Wax melting -> wick dipping -> sizing through the selected hole -> cooling along the extended path -> coated-wick preparation for the next production stage.
This is a functional overview, not an installation or operating procedure. Threading, temperature settings and operating adjustments should follow the equipment instructions and the agreed production setup.
Item | Specification |
|---|---|
Product Name | Wick Dipping Machine |
Model | YD-08 |
Power Supply | 220V, 50Hz, Single Phase |
Power | 5kW |
Drive Type | Electric |
Wick Size | 0.86-3 (unit to be confirmed), as listed in the product sheet |
Speed | 1700 m/hour, as listed in the product sheet |
Machine Size | 420 x 80 x 170cm |
Weight | 300kg |
Main Functions | Wax Melting, Wick Dipping and Sizing |
Layout Feature | Extended Path for Coated-Wick Cooling and Shaping |
Specification Notes: The speed is a linear wick-processing figure in meters per hour, not a finished-candle output rate. The product sheet does not specify the test conditions, coating thickness, wax temperature or cooling time. Confirm these against the intended wick and wax. The sheet does not clarify whether the wick-size range refers to the incoming wick or the finished coated diameter.
Please provide the wick material and incoming diameter, wax formulation, target coated diameter and required processing speed. Confirm the required sizing-hole set, acceptable coating profile and production test conditions. Verify the workshop power supply and installation space against the final equipment configuration.
