| Quantity: | |
|---|---|
Fully Automatic Wick Inserting Machine with Cutting and Glue Application for Container Candle Preparation in Production Lines
The Fully Automatic Wick Inserting Machine combines wick cutting, wick-tab punching, glue melting and application, and wick insertion for container candle preparation. The machine includes a sorting table and glue equipment, bringing these preparation functions together before the wax-filling stage.
Designed for round and square jars with a compatible setup, it supports one to four wicks per container. Adjustable width and height settings allow the arrangement to be matched to the intended jar format. The stainless steel machine can be used independently or paired with a compatible filling line, depending on the production layout.
Integrated Preparation: Wick cutting, tab punching, glue melting, glue application and insertion are combined in one machine, connecting the main wick-preparation functions before candle filling.
Glue Equipment Included: The product sheet describes a sorting table and glue machine as part of the set. Confirm the supplied accessories and adhesive requirements when defining the final configuration.
Adjustable Container Setup: Width and height adjustments support matching the machine to compatible round and square jars. Sample checks should establish the fixture arrangement and insertion access.
Single- and Multi-Wick Processing: The listed range is one to four wicks per jar. Define the required placement pattern and verify adhesion with the selected wick tabs, glue and containers.
Flexible Production Layout: The machine can operate as a separate unit or be paired with a filling line. Confirm transfer arrangements and cycle coordination with the equipment used downstream.
Container candle preparation before wax filling.
Integrated wick cutting, gluing and insertion in candle workshops.
Single-wick and multi-wick production using compatible jars.
A dedicated wick-preparation station alongside a candle filling line.
Wick cutting -> wick-tab punching -> glue melting and application -> wick insertion into the container -> prepared container ready for the next production stage.
This is a summary of the functions described in the source, not a detailed operating sequence. Container handling, operating settings and safety procedures should follow the equipment manual. Wax melting and wax filling are not claimed as functions of the inserter itself.
Item | Specification |
|---|---|
Product Name | Fully Automatic Wick Inserting Machine |
Model Reference | Appears as AWI-I-4; confirm letter I / digit 1 characters against the nameplate |
Power Supply | 220V, 50Hz, Single Phase |
Glue Melter Power | 3.5kW, as listed |
Heating Tube Power | 3.5kW, as listed separately |
Drive Type | Pneumatic and Electric |
Wick Quantity | 1-4 Wicks per Jar |
Wick Thickness | 0.86-2.8mm |
Wick Tab Sizes | 12.5 x 2.5mm; 14 x 3mm |
Container Diameter Range | Within 20cm; larger sizes can be customized, subject to confirmation |
Container Height Range | 30-180mm |
Overall Size | 300 x 120 x 170cm |
Net Weight | 608kg |
Construction | Stainless Steel; grade not specified |
Listed Set Components | Sorting Table and Glue Machine |
Operating Arrangement | Standalone Use or Pairing with a Compatible Filling Line |
Parameter Notes: The two power entries are reproduced separately; the sheet does not identify a total installed load. The tab dimensions are paired values without a dimensional drawing. Check their meaning against the actual tabs. For square containers, confirm width, depth and clearance rather than assuming the diameter range defines every suitable shape.
The source gives output figures without a consistent time basis. No hourly production rate is promised in this copy. Agree on an acceptance test using the required wick quantity, container format, placement pattern, adhesive and operating cycle. Check both the insertion result and the transfer to the next process.
Please provide container samples or drawings, wick specifications, tab dimensions, required wick positions, adhesive requirements and target output. Confirm the exact model reference, supply scope, total electrical load, compressed-air pressure and consumption, and any connection needed to a filling line.
