| Quantity: | |
|---|---|
Automatic Six Nozzle Wax Filling Machine with Independent Pump Control and PLC Touch Screen for Candle Jar Production Lines
The Automatic Six Nozzle Wax Filling Machine is designed for filling candle jars with wax. Each pump operates independently, while the PLC touch screen provides settings for filling weight, filling speed and the interval between fills. This arrangement allows the filling setup to be matched to the intended jar and production job.
The machine features adjustable filling-tank height for short and tall jars. The described configuration also includes a 150L transfer tank that pumps wax into the filling tank automatically using level-sensor detection. An outlet valve provides access for draining the filling tank during cleaning and product changeovers.
Independent Pump Operation: Each pump operates separately, allowing the filling arrangement to be set for the intended jars. Confirm the pump and nozzle settings with the target wax formulation and fill weight before production.
PLC Filling Settings: Filling weight, speed and interval time can be set through the PLC touch screen, bringing the main filling adjustments together at the operator interface for production setup.
Automatic Wax Replenishment: The described 150L transfer tank feeds wax into the filling tank using level-sensor detection. Confirm transfer operation and the supplied tank arrangement for the intended production layout.
Adjustable Tank Height: The filling-tank height can be adjusted for short and tall jars. Check the required container range and nozzle clearance with actual samples before agreeing on the final configuration.
Drainage and Material Details: An outlet valve supports tank draining for cleaning. The sheet lists an SS201 frame, SS304 product-contact parts and an SS316 pump body; confirm the component-level material schedule before ordering.
Wax filling for container candle production.
Production jobs requiring adjustable fill weight and cycle settings.
Candle jar ranges using different container sizes.
Filling operations with automatic replenishment from a transfer tank.
Confirm the wax formulation, working temperature, target fill weight and container dimensions. Establish the filling settings, verify each pump's output and check sample fills before a production run. Operating instructions, cleaning methods and changeover procedures should follow the equipment manual.
Item | Specification |
|---|---|
Product Name | Six Nozzle Electric Filling Machine |
Model Reference | Appears as YD-II-6; confirm exact lettering against the nameplate |
Filling Nozzles | 6 |
Power Supply | 380V, 60Hz, Three Phase |
Power | 23kW |
Filling Range | 10-1000g |
Listed Filling Speed | 1500 pcs/hour; confirm test conditions and counting basis |
Control Interface | PLC Touch Screen |
Adjustable Settings | Filling Weight, Filling Speed and Filling Interval |
Pump Operation | Independent Operation of Each Pump |
Motor Type | To Be Confirmed: introduction states step motor; parameter table states Servo Motor |
Transfer Tank | 150L, described in the introduction |
Replenishment | Automatic Pump Transfer with Level-Sensor Detection |
Container Diameter | 37-150mm; customization stated in the sheet |
Height Adjustment | Filling-Tank Height Adjustable for Short and Tall Jars |
Conveyor Dimensions | Source states Standard 24m L x 1.2m W, customizable; verify size and scope |
Machine Dimensions | Source states 2400 x 120 x 170cm; verify values, units and scope |
Frame Material | SS201 |
Product-Contact Parts | SS304, as listed |
Pump Body | SS316, as listed |
Cleaning Feature | Filling-Tank Outlet Valve |
Specification Notes: The motor descriptions conflict and do not establish two selectable motor options. The printed machine and conveyor dimensions require confirmation before layout planning or freight calculations. The material entries reproduce the source categories; confirm which surfaces and components each grade covers.
Please provide the wax formulation, working temperature, target filling weights, jar dimensions and desired output. Confirm the motor type, final installation drawing, conveyor length, 150L transfer-tank supply scope and material schedule. Agree on a measurable filling tolerance and production test conditions before making a performance commitment.
